Neogen SureKill SK300

Description

Product Alternatives: ULD BP-300, Riptide Waterbased Pyrethrin ULV

EPA Registration No.: 47000-178

Active Ingredients: Piperonyl Butoxide – 6%, Pyrethrins  – 3%, N-Octyl Bicycloheptene Dicarboximide – 10%

Product Use:

For indoor use as ULV, space, area, or contact spray.  This concentrate is designed for use undiluted in mechanical sprayers that give particles of aerosol size. It can be diluted with refined kerosenes, which meet Food Additive Regulation, as defined by CFR Title 21, §172.884, and applied to fogging equipment that gives larger than aerosol particle size. It can also be diluted with the oil specified above and applied as a contact spray to kill crawling insects, as shown later on the label.

Indoor Use- Undiluted:

ULV and Space Spray:

Remove or cover exposed food and food handling surfaces. Close room and shut off all air conditioning or ventilation equipment. Apply at a rate of 1 fluid ounce undiluted concentrate per 1,000 cubic feet (1.04 ml/m3) of space. Direct spray toward upper corners of room and ceiling. Leave room closed for ½ hour and ventilate thoroughly before re-entry. Do not apply this undiluted spray in residential areas of facilities operating under Federal Meat, Poultry, Shell Grading, and Egg Products Inspection Programs.

Contact and Space Spray:

To Kill Cockroaches, Waterbugs, Earwigs, Silverfish, Ants, and Spiders:

Using no more than 2 fluid ounces per 1,000 square feet, direct the spray first into all cracks and crevices, behind all equipment, cupboards, obstructions or dark harborages areas, walls, floors, underneath sinks, behind pipes, and in all places that harbor insects to provide penetration and impingement on the insects. Contact as many insects as possible. Do not allow spray to contact food. Then treat as a space spray. Apply at the rate of 1 fluid ounce per 1,000 cubic feet (1.04 ml/m3) of space. Leave room closed for ½ hour and ventilate thoroughly before re-entry. Do not apply this undiluted spray in residential areas of facilities operating under Federal Meat, Poultry, Shell Grading, and Egg Products Inspection Programs.

Note: If there is a need to treat such areas as conduits, motor housing, junction and switch boxes, or other electrical equipment, turn off electrical equipment prior to application. After application, allow time for oil to dissipate before starting motor or placing switches in “ON” position.

Undiluted in Aerosol Generator

To Kill Flies, Mosquitoes, and Gnats:

Close room and shut off all air conditioning or ventilation equipment. Apply at a rate of 1 ounce of undiluted concentrate per 1,000 cubic feet of space. Direct output from aerosol generator upward toward upper corners of room and ceiling. Do not remain in treated area. Exit treat area immediately, and leave room closed off for least one-half hour (30 minutes). Thoroughly ventilate the treated area before re-occupying.

INDOOR USE – DILUTED:

Diluted for Ordinary Mechanical Fogging Equipment:

To kill Flies, Mosquitoes, Small Flying Moths, and Gnats:

Close room and shut off all air conditioning or ventilation equipment. Dilute concentrate with oil at the rate of 1 part concentrate to 2 parts of oil and mix well. Apply a rate of 1 fluid ounce of concentrate per 1,000 cubic feet of space. Direct fog upward toward corners of room and ceiling area. Do not remain in treated area. Exit treated area immediately and leave room closed off for at least one-half hour (30 minutes). Thoroughly ventilate the treated area before re-occupying.

Surface Spray:

Dilute 2 fluid ounces of concentrate into 1 gallon of suitable diluent, mix well, and apply as a coarse wetting spray using approximately 1 gallon of spray mixture per 1,000 square feet (40 ml/m2) of surface. To ensure maximum control of listed crawling insects, spray thoroughly into all cracks, molding, crevices, walls, floors, and other surfaces and storage and handling areas. Particular attention should be paid to areas where moisture collects, such as drains, sinks, and water pipes, and around the bases of heavy machinery and equipment, contacting as many insects as possible.

Ants:
Spray directly into nests, along trails, and directly on all ants observed. Repeat as necessary

Contact Surface Spray:

Diluted to use with sprayers that give large, wetting spray particles.  Dilute concentrate with oil at the rate of 2 fluid ounces of concentrate with one gallon of suitable oil and mix well. Spray outside of walls of grain bins, flooring, around bases of milling machinery, walls and baseboards, areas behind cabinets, around pipes, and other insect harborages using one gallon spray per 1,000 square feet. Force spray into all cracks and crevices. Repeat application as necessary. Do not apply more than 1 time per day.