Cyper TC Termiticide/Insecticide

Description

CYPER TC MIXING DIRECTIONS:

Mix the termiticide in the following manner:

1. Fill tank 1/4 to 1/3 full with water.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through
3. Add appropriate amount of CYPER TC
4. Add remaining amount of water.
5. Let pump run and allow recirculation through the hose for 2 to 3 minutes

CYPER TC USE DILUTIONS:

TERMITES ABOVE GROUND:

For control of termites, subterranean aerial colonies, Formosan aerial colonies or drywood termites in localized areas of infested wood in structures, apply a 0.1%-0.25% emulsion to voids and galleries in damaged wood and in spaces between wooden members of a structure and between wood and foundations where wood is vulnerable. Application may be made to inaccessible areas by drilling, and then injecting the emulsion with a crack and crevice injector into the damaged wood or void spaces. Application to attics, crawl spaces unfinished basements, or man-made voids may be made with a coarse fan spray of 0.1%-0.25% emulsion to control workers and winged reproductive forms of termites in mud shelter tubes. This type of application is not intended to be a substitute for soil treatment for extensive infestation of drywood termites or other wood-infesting insects. Make treatments at a rate of 1 gallon of the emulsion per 1,000 sq. ft. of surface area.

For termites active inside trees, utility poles and/or fence post, drill to find the interior infested cavity and inject 0.1% emulsion using treatment tool with a splashback guard.

Termite carton nests in trees or building voids may be injected with 0.25%-0.50% emulsion using a pointed injection tool. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest material from building voids when such nests are found.

CARPENTER ANTS:

For control of carpenter ants in houses and other structures, apply as a 0.25% emulsion for protection up to 5 weeks, a 0.5% emulsion for protection up to 11 weeks, and a 1.0% emulsion for protection up to 1 year, with re-treatment semiannually as needed, around doors and windows, and other places where carpenter ants enter the premises and where they crawl. Spray into cracks and crevices or through openings or small-drilled holes into voids where these ants or their nests are present. Use no more than a sufficient amount of coarse spray to thoroughly cover the area. Do not allow runoff to occur. Do not exceed 1 gallon of dilute emulsion per 1000 square feet of treatment surface.

For carpenter ants active inside trees, utility poles and/or fence post, drill to find the interior infested cavity and inject 0.25% emulsion, for protection up to 1 week, using a treatment tool with a splashback guard. Reapply under heavy reinfestation pressure.

CARPENTER BEES:

Use a 0.1% emulsion for control of carpenter bees. Liquid may be sprayed directly into gallery entrance holes. Following treatment, the entrance holes may be left open 24 hours to be certain that returning adult bees are killed. When there is no activity, the hole may be closed with wood putty.

GENTERAL PEST CONTROL: 

CYPER TC Insecticide may be diluted with water for use to control pests in and around homes and other structure.