Bird-B-Gone Transparent Bird Gel

Description

EPA Registration No.: 8254-5-071050

Active Ingredient:  Polybutene – 93%

Where To Use:

Horizontal surfaces including: ledges, I-beams, parapet walls, conduit, pipes, flat or curved surfaces

Product Application:

Use a caulking gun and/or a putty knife to apply this product. Remove cap then carefully cut off the tip of plastic nozzle on top of tube. Insert a screwdriver or extension rod on caulk gun to puncture seal. Press against surface to ensure good adhesion.  To treat ledges or sills, apply beads of repellent no larger than 1/2″ wide by 1/2″ deep at the deepest part in strips no closer than 2″ apart, beginning 1″ in from the outer edge. To treat roofs, peaks, cornices, etc., apply a single bead of repellent along the highest point. A second treatment may be necessary if product becomes flattened by heavy bird traffic.

One 10 oz., tube of this product will treat 10 linear feet when applied in beads 1/2″ high and 1/2″ wide.

Directions For Use:

Apply the Transparent Bird Gel in a zigzag pattern about 3″ high, leaving periodic spaces for water drainage.  Do not install on vertical surfaces.

Use Restrictions:

Do not use around protected bird species.