Product Alternatives: Bifen I/T, Suspend SC
EPA Registration: 279-3206
Active Ingredient: Bifenthrin – 7.9%
- Remove the measuring chamber cap and induction seal. Replace the cap and securely tighten. Tip container until liquid fills measuring chamber.
- Return container to level position. No adjustment is needed.
- Remove measuring chamber cap and dispense into proper application
For multiple dose measuring: Remove fill chamber cap and dispense according to markings on side of bottle.
- 0.5%–1.0 fl. oz. per gallon of water per 1000 square feet.
|Amount of Talstar® P Professional Insecticide
(Gallons except where noted)
|Dilution Concentration||Amount of Talstar P Professional||Amount of Water||Desired Gallons of Finished Dilution|
|0.06%||1 fl oz
5 fl oz
10 fl oz.
25 fl oz.
|127 fl oz.
|0.12%*||2 fl oz
10 fl oz
19.5 fl oz.
|126 fl oz.
For best results, locate and treat nests. Dilute 0.5 to 1.0 fluid oz. of Talstar P Professional Insecticide per gallon of water and apply at the rate of one gallon of dilution per 1,000 square
feet as a crack and crevice or spot treatment to areas where labeled pests have been observed or are expected to forage. These areas include, but are not limited to, baseboards, in and behind cabinets, under and behind dishwashers, furnaces, refrigerators, sinks and stoves, around pipes, cracks and crevices and in corners. Particular attention should be given to treating entry points into the home or premises such as around doors and windows. When using Talstar P Professional Insecticide in combination with baits, apply Talstar P Professional Insecticide as instructed above, and use baits in other areas that have not been treated with Talstar P Professional Insecticide.
Where To Use:
Treat where pests have been seen or found or can find shelter.