Premise 2 Insecticide/Termiticide

Description

Product Alternatives: Dominion 2L, Navigator SC

EPA Registration No. – 432-1331

Active Ingredient: Imidacloprid – 21.4%

Premise 2 Is A Non-Repellant Termiticide/Insecticide: Undetectable To Termites And Other Pests

Mixing Instructions: SHAKE WELL.

Fill tank 1/4 to 1/3 full. If using a large sprayer, start pump to begin bypass agitation and place end of treating tool in tank to allow circulation through hose.  Add appropriate amount of  Premise 2 Termiticide/Insecticide.  Add remaining amount of water.  Let pump run and allow recirculation through the hose for 2-3 minutes.

Mixing Table for Premise 2:

Gallons, Water                0.05%                         0.1%

10                         80 mL              160 mL

5                          40 mL                80 mL

2                          16 mL                 32 mL

1                            8 mL                 16 mL

Proportional Injector Mixing Table for Premise 2:

Injector Volume (fl. oz/gal)               Concentration (%)

0.3                                                  0.05

0.6                                                  0.10

Application Volume:

Whenever possible, use the application volumes described in the “Directions For Use” on the label.  However, where soil conditions will not accept application of 4 gallons of Premise 2 Insecticide per 10 linear feet, twice the Premise 2 Insecticide concentration may be applied in 2 gallons of solution pre 10 linear feet.

Premise Pre-Construction is a non-repellent termiticide that offers high performance, affordability and excellent value. This product cannot be detected by termites – instead, they come directly in contact with the active ingredient, imidacloprid. And unlike some other termiticides, it won’t harm plumbing.