Bird-B-Gone Bird Spider 360

Product questions and answers

How does the bird spider 360 work?

0 votes

Q How does the bird spider 360 work? answer now
Asked on September 2, 2024 1:47 PM

A The Bird-B-Gone Spider 360 works by creating a visual distraction with its arms that freely sway in the wind scaring the birds form landing in the protected area where it has been installed.

How do you install the Bird-B-Gone Bird Spiders?

0 votes

Q How do you install the Bird-B-Gone Bird Spiders? answer now
Asked on December 7, 2022 8:04 AM

A The great thing about the Bird-B-Gone Spider 360 is not only do they work great at deterring birds from landing, but they can be installed multiple ways. They can be screwed down with the pre-drilled holes (make sure when using this method, you don't damage any electrical systems that might be in the way). They can be bonded down with E6100 Pro-Grade Adhesive and they also have a weighted sandbag option for those sensitive or areas you need to be able to remove when in use such as a boat. The Spider 360 will mount directly to the sandbag with included hardware.

How do I know which Bird-B-Gone Spider 360 to choose?

0 votes

Q How do I know which Bird-B-Gone Spider 360 to choose? answer now
Asked on December 7, 2022 8:00 AM

A
When buying the Bird-B-Gone Spider 360 measure the area you will need to protect to make sure the Bird Spider size that you choose will hang over the entire area by at least half inch.

Description

Material:

316 marine grade stainless steel “arms” on a UV protected polycarbonate base.

Installation Instructions:

The Bird Spider 360° comes pre-assembled and is easy to install and remove. Each unit comes standard with a glue-on base that can be glued down permanently to flat surfaces. There are several optional bases to secure the Bird Spider 360° including railing mounts and a removable sand bag base (sold separately).

Gluing down base: Apply a construction grade adhesive to the underside of the base, and apply to affected area. YOU MUST ASSURE ALL HOLES ARE SEALED TO PREVENT MOISTURE / WATER FROM ENTERING!

Screwing down base: This should be done whenever possible, using self tapping screws. Make sure you do not damage equipment (lights, A/C units, rooftops, etc.) when drilling or screwing!

Make sure ends of rods extend beyond edge of area to be covered.

Bird Spider 360° arm “tips” should overhang mounting surface by at least 2”.

Ensure mounting surface is clean of bird feces and debris before installing any bird deterrent, including the Bird Spider 360°. Use a 10% bleach or ammonia solution to disinfect the area.
Select the appropriate Bird Spider 360° (2’, 4’, 6’ or 8’) depending on the surface of coverage. It is important that the “tips” of the arms extend several inches over the outside surface(s).
Stainless Steel arms must have room to spin and move with the air. Do not mount Bird Spider 360° in an area where the arms will be suppressed from movement or blocked by walls.
Bird Spider 360° arm tips should be no more than 2-3” above mounting surface.
If the Bird Spider 360° requires gluing for the installation, the PVC adapter must be used.
If installing more than one Bird Spider 360° in a row, be sure that they are installed 6-8” from arm tip-to-arm tip (not base-to-base).

Additional information

Size	2 ft., 4 ft., 6 ft., 8 ft.

Manufacturer

Bird-B-Gone Inc.

Target Pests

Pigeons, Seagulls, Crows, Cormorants, Raptors, and other Larger Birds

For Use In

AC Units, Street Lights, Signs, Boats, Rooftops, Docks, Biminis, Skylights, Dock pilings, Signs and more!

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Description

Material:

316 marine grade stainless steel “arms” on a UV protected polycarbonate base.

Installation Instructions:

Gluing down base: Apply a construction grade adhesive to the underside of the base, and apply to affected area. YOU MUST ASSURE ALL HOLES ARE SEALED TO PREVENT MOISTURE / WATER FROM ENTERING!

Screwing down base: This should be done whenever possible, using self tapping screws. Make sure you do not damage equipment (lights, A/C units, rooftops, etc.) when drilling or screwing!

Make sure ends of rods extend beyond edge of area to be covered.

Bird Spider 360° arm “tips” should overhang mounting surface by at least 2”.

Ensure mounting surface is clean of bird feces and debris before installing any bird deterrent, including the Bird Spider 360°. Use a 10% bleach or ammonia solution to disinfect the area.

Select the appropriate Bird Spider 360° (2’, 4’, 6’ or 8’) depending on the surface of coverage. It is important that the “tips” of the arms extend several inches over the outside surface(s).

Stainless Steel arms must have room to spin and move with the air. Do not mount Bird Spider 360° in an area where the arms will be suppressed from movement or blocked by walls.

Bird Spider 360° arm tips should be no more than 2-3” above mounting surface.

If the Bird Spider 360° requires gluing for the installation, the PVC adapter must be used.

If installing more than one Bird Spider 360° in a row, be sure that they are installed 6-8” from arm tip-to-arm tip (not base-to-base).

Product questions and answers

Fast Free Shipping!

Product Features:

Sizes:

Product Documents

You might also like...