Product Alternatives: PT Alpine Pressurized Insecticide
EPA Registration No. – 499-548
Active Ingredient: Chlorfenapyr – 0.5%
Crack And Crevice Application: Use with the supplied actuator and injection tubes. Inject into cracks and crevices or void spaces where insects may be harboring, living and breeding. Place injector tip into cracks, crevices, holes and other small openings. Release approximately 1 sec of product. For light infestations, move injector tip along cracks while treating at the rate of 3 ln ft/sec. For heavy infestations, move injector tip along at 1 ln ft/sec. For closed voids, calculate the void’s cubic area and treat at the rate of 1 to 5 sec/3 ft cubed. Several holes may be required in long-running voids
SPOT TREATMENT: Use with the supplied actuator and injection tubes. Hold container upright while spraying. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible. Limit individual spot treatments to an area no larger than 2 ft2 /room. Before spot treating on plastic, painted or varnished surfaces, test a small, inconspicuous area and observe for staining or damage to finish.
Product Use Restrictions:
- DO NOT make outdoor applications during rain.
- DO NOT reapply to treated areas more than 1x every 4 weeks.
- DO NOT allow adults, children or pets to enter until vapors, mists and/or aerosols have dispersed, and the treated area has been thoroughly ventilated.
- DO NOT contact treated surfaces until dry.
There are no reviews yet.